In general, “soft” water contains low amounts of calcium and magnesium, and in particular low amounts of CaCO3, which is calcium carbonate. This compound tends to build up in limestone-rich groundwater, creating “hard” water which leaves a buildup of chalky deposits on glassware and appliances over time. “Hard” water can be softened by allowing it to react with NaCl (sodium chloride - table salt) or KCl (potassium chloride, another salt) in a water softening system, which exchanges the calcium and magnesium ions for sodium or potassium. In this way, the water still contains other compounds and ions than pure H2O, and so is not demineralized.
Demineralized water must go through some sort of extraction process instead of exchange process. The most common methods are 1) reverse osmosis, which forces water through a semiporous membrane to remove larger molecules, 2) distillation, which reduces water to steam that is collected in a second container, leaving the heavier ions behind in the original container, and 3) deionization, which uses charged resin plates to attract charged particles, break ionized bonds to free H+ and OH- ions, and combine them into H2O while removing any residual metal ions. This last method is large, expensive, and very effective, and typically used in laboratory environments versus home settings.
Product Details:
Minimum Order Quantity | 1 Unit |
Treatment Technique | ION EXCHANGE |
Automation Grade | Semi-Automatic |
Softener Tank Type | Vertical |
Cleaning System | REGENERATION |
Capacity (m3/hr) | 2.0 |
Inlet Flow Rate | 3 KG |
Brand | Greensign |
Capacity | 4 m3/hr |
Color | NATURAL |
Type | DOWN FLOW |
Installation Service | Yes |
Voltage | 220V |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Automation Grade | Semi-Automatic |
Brand | Greensign |
Color | NATURAL |
Treatment Technique | ION EXCHANGE |
Type | SOFTENER |
Softener Tank Type | Vertical |
Inlet Flow Rate | AS PER DESIGN |
Capacity | UPTO 10 m3 |
Material | FRP VESSEL |
APPLICATION
Apartments, Automobile Industries, Chemical Industries, Foundries, Hospitals, Clinics, Hotels, Restaurants, Humidification, Villas, It Parks, Paper Industries, Pharmaceutical Industries, Poultry Farms, Processing Industries, Schools, Colleges And Textile Industries.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Type | WATER SOFTENING |
Softener Tank Type | Vertical |
Cleaning System | REGENERATION |
Capacity | AS PER DESIGN |
Brand | GREENSIGN |
Treatment Technique | ION EXCHANGE |
Inlet Flow Rate | AS PER DESIGN |
Automation Grade | Semi-Automatic |
Material | AS PER DESIGN |
Industrial water softener is a kind of water filter, which removes hardness from water causes due to presence of Calcium and Magnesium. For industries and commercial units, hard water poses a potential threat. The performance of boilers, cooling towers and other associated equipment adversely affected by scaling caused by hard water. Water Softener is considered as concrete solution for this problem, which prevents scale forming. At Green sign systems & controls, we deal in industrial hard water treatment with manufacturing of water softener plant from 1 m3/h to 50 m3/hor more.
Industrial water softeners manufactured by us offer long years of reliable performance at very low investment price. Available with manual, semi-automatic or fully automatic controls, these units are constructed as portable systems; skid mounted packaged treatment plants or large custom built units. To meet the needs of specific applications, our hard water softeners are available with wide range of configurations including piping quality, tank construction, single, double and triple unit arrangements etc.
Our hard water softener systems efficiently remove hardness using the kinetic energy in your water and deliver an uninterrupted supply of softened water all day using unique tank design and certified parts. Our range of commercial and industrial water softeners can also be used for soluble iron removal. In addition to general hard water applications, we construct water softening plant for boiler, heat exchanger and cooling tower of any capacity. We also undertake annual maintenance contract (AMC), which is not mandatory but advisable for minimizing downtime and maintaining running cost.
Sizing and Design CustomizationHow to determine the correct size of an Industrial Water Softener? It is a general question asked by many buyers. We provide practical advice and design guidelines on setting up water softener for industrial and commercial use. Size or capacity and design depend upon many factors such as, flow rate requirements (LPH or GPD), TDS level and Regeneration frequency etc.
- Volume of water to be treated
- Hardness of water
- Regeneration frequency in a day
Hospitals and healthcare | Hotels and resorts |
Food processing units | Cooling tower feed water |
Boiler feed water | Humidification and air conditioning |
Pharmaceutical industry | Oil and gas |
Restaurant | Heating system |
- New softening plant consultancy
- Water analysis and lab support
- Tailor made technical specifications
- Complete Installation and commissioning
- Small and large capacity plants
- Skid mounted and floor mounted units
- Ion exchange regeneration service
- Proper training to plant operator
- Immediate After sales service
- 24-hour emergency service
- Existing plant repair and AMC / CMC
- Portable systems and rental services
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand | Greensign |
Body Material | Stainless Steel |
Capacity | as per design |
Industrial water softener is a kind of water filter, which removes hardness from water causes due to presence of Calcium and Magnesium. For industries and commercial units, hard water poses a potential threat. The performance of boilers, cooling towers and other associated equipment adversely affected by scaling caused by hard water. Water Softener is considered as concrete solution for this problem, which prevents scale forming. At Green sign systems & controls, we deal in industrial hard water treatment with manufacturing of water softener plant from 1 m3/h to 50 m3/hor more.
Industrial water softeners manufactured by us offer long years of reliable performance at very low investment price. Available with manual, semi-automatic or fully automatic controls, these units are constructed as portable systems; skid mounted packaged treatment plants or large custom built units. To meet the needs of specific applications, our hard water softeners are available with wide range of configurations including piping quality, tank construction, single, double and triple unit arrangements etc.
Our hard water softener systems efficiently remove hardness using the kinetic energy in your water and deliver an uninterrupted supply of softened water all day using unique tank design and certified parts. Our range of commercial and industrial water softeners can also be used for soluble iron removal. In addition to general hard water applications, we construct water softening plant for boiler, heat exchanger and cooling tower of any capacity. We also undertake annual maintenance contract (AMC), which is not mandatory but advisable for minimizing downtime and maintaining running cost.
Sizing and Design CustomizationHow to determine the correct size of an Industrial Water Softener? It is a general question asked by many buyers. We provide practical advice and design guidelines on setting up water softener for industrial and commercial use. Size or capacity and design depend upon many factors such as, flow rate requirements (LPH or GPD), TDS level and Regeneration frequency etc.
- Volume of water to be treated
- Hardness of water
- Regeneration frequency in a day
Hospitals and healthcare | Hotels and resorts |
Food processing units | Cooling tower feed water |
Boiler feed water | Humidification and air conditioning |
Pharmaceutical industry | Oil and gas |
Restaurant | Heating system |
- New softening plant consultancy
- Water analysis and lab support
- Tailor made technical specifications
- Complete Installation and commissioning
- Small and large capacity plants
- Skid mounted and floor mounted units
- Ion exchange regeneration service
- Proper training to plant operator
- Immediate After sales service
- 24-hour emergency service
- Existing plant repair and AMC / CMC
- Portable systems and rental services
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Water Source | Borewell Water |
Type Of Purification Plants | Demineralisation |
Motor | 3 kw |
Brand | Greensign |
Area Available of Plant Installation | 200 SQUARE FEET |
RO Capacity | AS PER DESIGN |
Voltage | 220V |
Frequency | 50 Hz |
Features | WATER TREATMENT |
Usage/Application | PROCESS INDUSTRY |
Capacity Inlet Flow Rate | 50 L/Hour |
Power | 1.5 kW |
What is Demineralizer?
A demineralizer is a system, which uses ion exchange chemical process to remove dissolved ionic compounds (salts) from water. It is also known as Deionized Water System, Demineralizer or DM Plant. A typical Demineralization Plant (DM Plant) consists of two vessels. The feed water or raw water is passed through first vessel i.e. containing strong base cation resin in the form of Hydrogen (H+), whereupon all the positively charged ions (sodium, calcium, iron and copper etc.) are exchanged for Hydrogen ions; after that, the water further passed through another vessel containing strong base anion resin in the form of Hyudroxyl (OH-), whereupon all the negatively charged ions (chloride, sulphate, nitrate, etc) are exchanged for hydroxide ions which then combine with the hydrogen ions to form water.
Types of Demineralizers
Two Bed Demineralizer
Mixed Bed Demineralizer
Demineralizer Configurations
Portable water demineralizer
Packaged DM Water Plant
Custom Built DM Plant
DM Plant Regeneration
Depending upon frequency of use and DI Water output, resin becomes exhausted and does not capable to deionize; in other words, their power of removing ionic materials reduces and active ion concentration reaches a low level. The process of restoring their power or enhancing active ion concentration level is called regeneration. In this process exhausted cation and anion ions are recharged with Hydrogen (H) Hydroxyl (OH) ions.
Demineralizer Applications
- Paint Factory | - Printing | - Horticulture / Greenhouse |
Two Bed Demineralizer
Often called Dual Bed, Two Bed Demineralizers have the cation resin and anion resin in separate vessels. They can be regenerated is series (cation followed by anion); or in parallel (cation and anion simultaneously). Anion resin must have the hardness removed from the influent water to prevent hardness fouling. The Cation resin is regenerated with acid (hydrochloric or sulfuric) and the Anion resin is regenerated with sodium hydroxide (caustic soda).
Two Bed Demineralizers normally produce water quality in the range of 50,000 ohms up to 200,000 ohms resistivity, which is between 8.5 and 2.0 ppm TDS as CaCO3. Automatic mixed deionizers utilize the same resins but mix the two resins for use. This produces a significantly higher purity than two column design, up to 18 megohm.
Mixed Bed DM Plant
Mixed Bed DM Plant is a single vessel unit, which combines Cation and Anion exchangers in a single column. When it comes to require high-purity Demineralized Water, mixed bed demineralizer is considered more efficient in many ways. It is used as polishing unit to purify water to higher levels, which is treated through Two Bed demineralizer or Reverse Osmosis Unit at earlier stage. At Bionics Advanced Filtration Systems, we manufacture mixed bed demineralizer plant up 50 m3/h with manual or automatic regeneration facility as required.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Automation Grade | Semi-Automatic |
Approximate Power Consumption | AS PER DESIGN |
Impurities to be removed | YES |
Industry | PROCESS |
Inlet Water Quality | RO WATER |
Treated Water Quality | DE-MINERALISED |
Installation Type | Containerized Plug & Play |
Overall Dimensions | AS PER DESIGN |
Material of Construction | FRP WITH SS PIPE LINES |
Brand | GREENSIGN |
Capacity | UPTO 10000 LITERS |
Type | Mineral Removal |
Water Source | Borewell Water |
Being the foremost names of the market, we present a wide series of Distilled Water Plant which is permitted in the market for their sturdy structure and reliable performance. Provided plants are made at our experts end utilizing the reliable input which is sourced from reliable sellers of market. Our presented plants are available in the market at affordable prices.
Features :
Longer life
Sturdy design
Low maintenance
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Water Source | Borewell Water |
Automation Grade | Semi-Automatic |
Brand | Greensign |
Flow rate | 100 m3/hour |
Voltage | 440 V |
Frequency | 50 HZ |
Phase | THREE PHASE |
Usage/Application | DE-MINERALIZATION |
What is Demineralizer?
A demineralizer is a system, which uses ion exchange chemical process to remove dissolved ionic compounds (salts) from water. It is also known as Deionized Water System, Demineralizer or DM Plant. A typical Demineralization Plant (DM Plant) consists of two vessels. The feed water or raw water is passed through first vessel i.e. containing strong base cation resin in the form of Hydrogen (H+), whereupon all the positively charged ions (sodium, calcium, iron and copper etc.) are exchanged for Hydrogen ions; after that, the water further passed through another vessel containing strong base anion resin in the form of Hyudroxyl (OH-), whereupon all the negatively charged ions (chloride, sulphate, nitrate, etc) are exchanged for hydroxide ions which then combine with the hydrogen ions to form water.
Types of Demineralizers
Two Bed Demineralizer
Mixed Bed Demineralizer
Demineralizer Configurations
Portable water demineralizer
Packaged DM Water Plant
Custom Built DM Plant
DM Plant Regeneration
Depending upon frequency of use and DI Water output, resin becomes exhausted and does not capable to deionize; in other words, their power of removing ionic materials reduces and active ion concentration reaches a low level. The process of restoring their power or enhancing active ion concentration level is called regeneration. In this process exhausted cation and anion ions are recharged with Hydrogen (H) Hydroxyl (OH) ions.
Demineralizer Applications
- Paint Factory | - Printing | - Horticulture / Greenhouse |
Two Bed Demineralizer
Often called Dual Bed, Two Bed Demineralizers have the cation resin and anion resin in separate vessels. They can be regenerated is series (cation followed by anion); or in parallel (cation and anion simultaneously). Anion resin must have the hardness removed from the influent water to prevent hardness fouling. The Cation resin is regenerated with acid (hydrochloric or sulfuric) and the Anion resin is regenerated with sodium hydroxide (caustic soda).
Two Bed Demineralizers normally produce water quality in the range of 50,000 ohms up to 200,000 ohms resistivity, which is between 8.5 and 2.0 ppm TDS as CaCO3. Automatic mixed deionizers utilize the same resins but mix the two resins for use. This produces a significantly higher purity than two column design, up to 18 megohm.
Mixed Bed DM Plant
Mixed Bed DM Plant is a single vessel unit, which combines Cation and Anion exchangers in a single column. When it comes to require high-purity Demineralized Water, mixed bed demineralizer is considered more efficient in many ways. It is used as polishing unit to purify water to higher levels, which is treated through Two Bed demineralizer or Reverse Osmosis Unit at earlier stage. At Bionics Advanced Filtration Systems, we manufacture mixed bed demineralizer plant up 50 m3/h with manual or automatic regeneration facility as required.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Installation Type | Containerized Plug & Play |
Type | Water Purification for Drinking |
Automation Grade | Manual |
Water Source | Borewell Water |
Features | DEMINERALISED |
Flow Rate | AS PER DESIGN |
PH Value | AS PER DESIGN |
Pressure | 4 KG |
Size | AS PER DESIGN |
Installation | Yes |
Condition | New |
Additional Information: