EFFLUENT TREATMENT PLANTS

Product Details:

Effluent is a liquid waste (wastewater) generated by factories, hotels, vehicle service centers and other commercial business units. As it contains high level of BOD, COD, TSS and TDS, it puts negative effect on the water and soil. The high level of BOD significantly decreases dissolved oxygen (DO) level; hence, it puts fresh water resources in danger. In today's scenario it is imperative to treat industrial wastewater to a level where it can be reused safely or drain out without affecting the environment. CPCB and other statuary bodies have set some guidelines for wastewater that every effluent treatment plant must follow.

Effluent Treatment Process Explained

 Industrial wastewater (effluent) is treated in a number of ways; the level of treatment decides which is appropriate. Basically there are four steps: Preliminary, Primary, Secondary and Tertiary.

Preliminary Treatment: Screening, grit and oil removal are done at preliminary treatment process.

Primary Treatment: Primary treatment involves removal of suspended solids up to 50% and reducing BOD level up to 30%.

Secondary Treatment: This is sometimes referred to Biological Treatment. Through biological processes, dissolved and suspended organic wastes are converted to more stable solids and removed by settling.

Tertiary Treatment: It is the final stage which involves physical, chemical and biological processes to remove residual suspended solids and dissolved solids.

Common Effluent Treatment Plant (CETP)

Especially designed for industrial estates and SEZs, where establishment of individual effluent treatment facility is not possible; concept of Common Effluent Treatment Plant (CETP) comes into effect. It is a kind of waste management, where small and medium sized industries jointly treat their wastewater affordably by installing such an Effluent Treatment Plant, which is common for every unit. Installation of ETP for single manufacturing unit is not possible due to budget problem and limited area allotment to each unit; therefore, a CETP is a best option which not only protects water environment but also divides the investment and operational costs. Wastewater pipelines from every manufacturing unit are connected to the CETP for treatment.

Effluent Treatment services

We act as your one stop source of complete wastewater treatment solution; with wide range of chemicals, systems and services, we help your industry to meet stringent water discharge and reuse goals in compliance with statutory authorities.

We design, manufacture, erect and commission effluent treatment plant (ETP) for industrial and commercial units at economical price. Civil and allied works are optional and can also be done if required by client. The completed plant is handed over to the client after conducting successful performance and acceptance tests. Through training is also provided to the operators of ETP. If required, we also provide our own operators at client's site for operation and maintenance of effluent treatment plant.

We have experienced engineering team, which conducts all designing, erection and commissioning at client's site. Our company follows all safety policy and plant safety rules under factories act.

Expertise

- On site visit and analysis
- Complete project management
- Designing & manufacturing of equipment
- Installation with civil work
- Commissioning of the plant including training to operators
- After sales service and AMC programs

Additional Information:

• Item Code: GSCBETP0054
• Production Capacity: 10 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGNMENT

Product Details:

Fabricated Effluent Treatment Plant

We construct and install packaged treatment plants to generate high quality treated wastewater, which is safely released into the river or re-used at the same site. Our packaged ETP plants are pre-engineered systems designed for on-site usage or commercial or industrial applications, where treatment of low quantities of effluent required. Available in 5 KLD to 200 KLD capacities, these units are compact in size and occupy very less space and require very low operational cost. As required, our packaged etp plant units can be designed as skid mounted or containerized. The most important advantage of wastewater treatment container is its movability; a containerized ETP is fabricated at our factory and transported to the site, where it is used. Construction site, disaster areas, civil and military base camps are fewer examples, where our packaged wastewater treatment plants are mostly used.

Effluent is nothing but the wastewater that has been contaminated by anthropogenic industrial or commercial activities prior to its release into the environment or its reuse. Different industries produce wastewater, although in recent years there have been many efforts towards recycling and reusing such treated waste. Water is an important component of every food manufacturing plant. It is used as an ingredient, coolant, solvent for cleaning in process (CIP) or in many other chemical based reactions in companies. After the completion of manufacturing process, this influent gets converted into wastewater which gets expelled from industry as a byproduct called effluent. Effluents contain a mix of contaminants, both toxic and nontoxic, including heavy metals and various organic materials. With the majority of effluents containing 99.9% water, it’s important to remove the remaining solids. To do this we create an effluent treatment plant that purifies industrial wastewater to be recycled or disposed of safely. Every company has a unique effluent composition and therefore needs personalized effluent treatment plants to meet their specific needs.

As a partner to our corporate customers we ensure environmental responsibility through innovative and cost saving solutions that treat industrial wastewater from a variety of industries and at any level of impurities. We offer packaged ETPs with nitrification & denitrification plants, physico chemical treatment plants, anoxic bioreactor and fluidized bed aerobic bio-reactor (FAB) plants as well as other advanced wastewater treatment strategies for recovery, reuse and recycling.

Additional Information:

• Item Code: GSFETP0055
• Production Capacity: 10 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGNMENT

Product Details:

Our water treatment products and services cover all aspects of an automobile factory unit; from assembly, engine transmission, body and paint shop, we can manufacture and install wide range of water purification systems ensuring consistent water supply that meet industry specific standards. In addition, we also treat wastewater generated at various stages of automotive manufacturing process; our effluent treatment plant meets environmental guidelines.

From traditional water treatment system to wastewater reuse systems, membrane bioreactors, UV disinfection systems, Zero discharge plant and RO Systems, we have unique solution for your every unique need. For automobile factory units, our water treatment products and services are tailored to meet specific requirements.

Keeping in mind the true objectives, engineering team at Greensign systems and controls designs and develops water and wastewater treatment solutions for automobile manufacturers, their suppliers and industries, which help in following ways:

- Manufacturing of quality products
- Reducing costs and investments
- Improving their plant's environmental record
- Maintaining good labor relations on production sites

Treatment Areas
Our Solutions

- Reverse Osmosis Plant (RO System)
- Water Demineralization Plant
- Industrial Water Softener
- Effluent Treatment Plant (ETP)
- Wastewater Treatment / Recycling Plant
- UV / Ozone System
- Ultra filtration / MBR

Additional Information:

• Item Code: GSAWWTP0050
• Production Capacity: 50 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGBNMENT

Product Details:

Our water treatment products and services cover all aspects of an automobile factory unit; from assembly, engine transmission, body and paint shop, we can manufacture and install wide range of water purification systems ensuring consistent water supply that meet industry specific standards. In addition, we also treat wastewater generated at various stages of automotive manufacturing process; our effluent treatment plant meets environmental guidelines.

 From traditional water treatment system to wastewater reuse systems, membrane bioreactors, UV disinfection systems, Zero discharge plant and RO Systems, we have unique solution for your every unique need. For automobile factory units, our water treatment products and services are tailored to meet specific requirements.

Keeping in mind the true objectives, engineering team at Greensign systems and controls designs and develops water and wastewater treatment solutions for automobile manufacturers, their suppliers and industries, which help in following ways:

- Manufacturing of quality products
- Reducing costs and investments
- Improving their plant's environmental record
- Maintaining good labor relations on production sites

Treatment Areas
Our Solutions

- Reverse Osmosis Plant (RO System)
- Water Demineralization Plant
- Industrial Water Softener
- Effluent Treatment Plant (ETP)
- Wastewater Treatment / Recycling Plant
- UV / Ozone System
- Ultra filtration / MBR

Greensign systems and controls is a water recycling system which consists of the following systems

• Oil - Sludge Separator
• Multimedia Filter
• Activated Carbon Filter
• Resin Softener

The equipment is skid mounted. Each of the above modules can be ordered separately.

The Equipment is available in following flow rates:

• 2000 liters / hour
• 5000 liters / hour
• 10,000 liters / hour
• 20,000 liters / hour
• 30,000 liters / hour
• 60,000 liters / hour
• 1,00,000 liters / hour

The equipment above 10,000 liters/hour comes under the bracket of customised equipment.

Additional Information:

• Item Code: GSAWWTP0051
• Production Capacity: 50 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGNMENT

Product Details:

Effluent is a liquid waste (wastewater) generated by factories, hotels, vehicle service centers and other commercial business units. As it contains high level of BOD, COD, TSS and TDS, it puts negative effect on the water and soil. The high level of BOD significantly decreases dissolved oxygen (DO) level; hence, it puts fresh water resources in danger. In today's scenario it is imperative to treat industrial wastewater to a level where it can be reused safely or drain out without affecting the environment. CPCB and other statuary bodies have set some guidelines for wastewater that every effluent treatment plant must follow.

Effluent Treatment Process Explained

Industrial wastewater (effluent) is treated in a number of ways; the level of treatment decides which is appropriate. Basically there are four steps: Preliminary, Primary, Secondary and Tertiary.

Preliminary Treatment: 

Screening, grit and oil removal are done at preliminary treatment process.

Primary Treatment: 

Primary treatment involves removal of suspended solids up to 50% and reducing BOD level up to 30%.

Secondary Treatment: 

This is sometimes referred to Biological Treatment. Through biological processes, dissolved and suspended organic wastes are converted to more stable solids and removed by settling.

Tertiary Treatment: 

It is the final stage which involves physical, chemical and biological processes to remove residual suspended solids and dissolved solids.

Common Effluent Treatment Plant (CETP)

Especially designed for industrial estates and SEZs, where establishment of individual effluent treatment facility is not possible; concept of Common Effluent Treatment Plant (CETP) comes into effect. It is a kind of waste management, where small and medium sized industries jointly treat their wastewater affordably by installing such an Effluent Treatment Plant, which is common for every unit. Installation of ETP for single manufacturing unit is not possible due to budget problem and limited area allotment to each unit; therefore, a CETP is a best option which not only protects water environment but also divides the investment and operational costs. Wastewater pipelines from every manufacturing unit are connected to the CETP for treatment.

Effluent Treatment services

We act as your one stop source of complete wastewater treatment solution; with wide range of chemicals, systems and services, we help your industry to meet stringent water discharge and reuse goals in compliance with statutory authorities.

We design, manufacture, erect and commission effluent treatment plant (ETP) for industrial and commercial units at economical price. Civil and allied works are optional and can also be done if required by client. The completed plant is handed over to the client after conducting successful performance and acceptance tests. Through training is also provided to the operators of ETP. If required, we also provide our own operators at client's site for operation and maintenance of effluent treatment plant.

We have experienced engineering team, which conducts all designing, erection and commissioning at client's site. Our company follows all safety policy and plant safety rules under factories act.

Expertise
- On site visit and analysis
- Complete project management
- Designing & manufacturing of equipment
- Installation with civil work
- Commissioning of the plant including training to operators
- After sales service and AMC programs

Additional Information:

• Item Code: GSEWTP0052
• Production Capacity: 30 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGNMENT

Product Details:

Effluent

Effluent is a liquid waste (wastewater) generated by factories, hotels, vehicle service centers and other commercial business units. As it contains high level of BOD, COD, TSS and TDS, it puts negative effect on the water and soil. The high level of BOD significantly decreases dissolved oxygen (DO) level; hence, it puts fresh water resources in danger. In today's scenario it is imperative to treat industrial wastewater to a level where it can be reused safely or drain out without affecting the environment. CPCB and other statuary bodies have set some guidelines for wastewater that every effluent treatment plant must follow.

Effluent Treatment Process Explained

Industrial wastewater (effluent) is treated in a number of ways; the level of treatment decides which is appropriate. Basically there are four steps: Preliminary, Primary, Secondary and Tertiary.

Preliminary Treatment: 

Screening, grit and oil removal are done at preliminary treatment process.

Primary Treatment: 

Primary treatment involves removal of suspended solids up to 50% and reducing BOD level up to 30%.

Secondary Treatment: 

This is sometimes referred to Biological Treatment. Through biological processes, dissolved and suspended organic wastes are converted to more stable solids and removed by settling.

Tertiary Treatment: 

It is the final stage which involves physical, chemical and biological processes to remove residual suspended solids and dissolved solids.

Packaged ETP Plant

We construct and install packaged treatment plants to generate high quality treated wastewater, which is safely released into the river or re-used at the same site. Our packaged ETP plants are pre-engineered systems designed for on-site usage or commercial or industrial applications, where treatment of low quantities of effluent required. Available in 5 KLD to 200 KLD capacities, these units are compact in size and occupy very less space and require very low operational cost. As required, our packaged etp plant units can be designed as skid mounted or containerized. The most important advantage of wastewater treatment container is its movability; a containerized ETP is fabricated at our factory and transported to the site, where it is used. Construction site, disaster areas, civil and military base camps are fewer examples, where our packaged wastewater treatment plants are mostly used.

Effluent Treatment services

We act as your one stop source of complete wastewater treatment solution; with wide range of chemicals, systems and services, we help your industry to meet stringent water discharge and reuse goals in compliance with statutory authorities.

We design, manufacture, erect and commission effluent treatment plant (ETP) for industrial and commercial units at economical price. Civil and allied works are optional and can also be done if required by client. The completed plant is handed over to the client after conducting successful performance and acceptance tests. Through training is also provided to the operators of ETP. If required, we also provide our own operators at client's site for operation and maintenance of effluent treatment plant.

We have experienced engineering team, which conducts all designing, erection and commissioning at client's site. Our company follows all safety policy and plant safety rules under factories act.

Expertise

- On site visit and analysis
- Complete project management
- Designing & manufacturing of equipment
- Installation with civil work
- Commissioning of the plant including training to operators
- After sales service and AMC programs

Additional Information:

• Item Code: GSCEWTP0053
• Production Capacity: 10 UNITS
• Delivery Time: 30 DAYS
• Packaging Details: AS PER CONSIGNMENT

Product Details:

 

World's most technologically advanced RO water purifier with a transparent design that shows off Greensign ROTechnology and an inbuilt TDS controller. Best suited for Indian homes and offices, it is suitable for purifying brackish/tap water/municipal corporation water supply. 

 

ROTechnology

 

Greensign’s RO Technology retains essential natural minerals in purified water using the TDS Controller, thereby providing 100% safe and tasty drinking water.

Double Purification

The double purification of RO + UV / UF removes even dissolved impurities such as chemicals, bacteria, viruses and salts, making the water 99% pure.

Computer Controlled Operation

Greensign water purifiers comes with computer controlled operations like a Filter Change Alarm that indicates filter replacement time and a UV Fail Alarm that alerts you when the UV lamp becomes inefficient, ensuring enhanced safety and convenience for you.

 

World's Top Quality Certifications

This RO purifier component is tested and certified for its performance and quality by world's renowned laboratories, such as the WQA (USA & India) and NSF (USA). These achievements guarantee that Greensign not only gives the most purified water but is also trusted by millions.

High Storage and Purification Capacity

Greensign water purifiers has 8 liters of purified water storage capacity. Its high purification capacity of 15 L/hr helps in providing purified water at a faster rate, making it easily available for you.

APPLICATION

Apartments, Automobile Industries, Chemical Industries, Foundries, Hospitals, Clinics, Hotels, Restaurants, Humidification, Villas, It Parks, Paper Industries, Pharmaceutical Industries, Poultry Farms, Processing Industries, Schools, Colleges And Textile Industries.

 

Additional Information:

• Item Code: GSDWPS0004
• Production Capacity: 500 NOS
• Delivery Time: 10 DAYS
• Packaging Details: AS PER CONSIGNMENT